What Are FRP Linings in Cooling Towers?
FRP linings are very important for making industrial cooling towers last longer and work better. Fiberglass Reinforced Plastic (FRP) is a strong composite material comprised of fiberglass strands embedded in a resin matrix. FRP linings are used in cooling towers to keep the inside surfaces from rusting, getting wet, and coming into contact with chemicals. Read on to learn more.
Cooling towers work in tough conditions, with water constantly moving, temperatures changing, and chemicals being used. If they aren’t protected properly, structural parts can break down quickly. FRP linings are made to stop that from happening and make sure that systems maintain working well.
Why FRP Linings Are Necessary for Cooling Towers
Cooling towers are more likely to rust since they are always in contact with water, biocides, and mineral deposits. If you don’t protect them, concrete, steel, and wood surfaces can all get damaged over time.
FRP linings make a smooth, non-porous barrier that keeps moisture and chemicals from getting to the materials underneath. This protection helps keep the tower from cracking, spalling, rusting, and getting weaker, which can cost a lot of money in downtime or possibly require a whole tower replacement.
Important Benefits of FRP Linings
There are a number of reasons why FRP linings are great for protecting and fixing cooling towers:
• Resistant to chemicals, salts, and treated water that cause corrosion
• A waterproof barrier that stops leaks and moisture from getting in • A high strength-to-weight ratio that doesn’t add too much weight
• A long service life with less maintenance
• An application that doesn’t have seams, which lowers the number of failure sites
Compared to patching up problems over and over again or replacing the whole system, these features make FRP linings a good value.
Where to Put FRP Linings in Cooling Towers
You can put FRP linings on a lot of the inside surfaces of cooling towers, such as:
• Sumps and basins
• Walls and floors inside
• Structural supports
• Hot water decks
• Places where water or chemicals are likely to collect
Each application is made to fit the design of the cooling tower, how it works, and how much damage has already been done.
FRP Linings Compared to Other Coatings
FRP linings are thicker, stronger, and last longer than regular paint or epoxy coatings. Coatings may protect for a short time, but they can wear off quickly when water and chemicals are constantly flowing over them.
FRP systems are stronger, which makes them superior for long-term protection in tough industrial settings like cooling towers. They also stick well to prepared surfaces, which makes the solution more reliable and longer-lasting.
When is the best time to put in FRP linings?
People often put FRP linings in when they are fixing leaks, fixing cooling towers, or doing regular maintenance. If you see corrosion, cracks, water leaks, or maintenance problems that keep coming up, your cooling tower may need FRP lining.
Fixing these problems early can keep the cooling tower from breaking down completely and make it last longer.
Take Care Of Your Cooling Tower Investment
FRP linings can safeguard your cooling tower for a long time if it is starting to exhibit indications of wear or corrosion. Allkote Lining Inc AZ makes professional FRP lining systems that are perfect for tough industrial uses.
Call Allkote Lining Inc AZ today to talk about your cooling tower needs and find out how FRP linings can help your equipment last longer and cut down on expensive downtime.
Phoenix Valley FRP Lining Installation
If you are searching for a company that does FRP linings in storage tanks, All Kote Lining Inc. has all your needs covered. We proudly install FRP linings in any size tank for both public works, industrial facilities, and other locations that have storage tank needs. To find out how we can save you money on repairs for your storage tanks with FRP linings, please call